Replacement Banner Graphic - X Banner

Our X Banner graphics are printed onto a 600gsm tear-resistant fire-rated blockout PVC which means you will not be able to see a shadow of the pole through the graphic. We use a UV flatbed printer so the inks won't fade or run and our inks don't contain VOCs which are harmful to the environment.

Graphic only supplied. 

Artwork Requirements - design templates are also available in our download section below

Size: 800mm wide x 1800mm tall

Resolution:We suggest no less than 150dpi at full size. Please increase resolution accordingly to allowfor any enlargement should you set artwork at a reduced-scale.

Colour Mode:Supply artwork in CMYK mode only

Important Info:X Banner graphics are finished with an eyelet at around 25mm inset from each corner. Please bear this in mind when setting up your artwork. The Nickel plated eyelets are silver in colour and allow for the new panel to hook-over your existing x banner frame.

Our X banner graphics 800mm wide x 1800mm tall. You should confirm costs with us by phone before ordering if the size of the print you require is different than this or you originally purchased your X Banner from another supplier.

X Banner graphics are finished with an eyelet at around 25mm inset from each corner. The Nickel plated eyelets are silver in colour and allow for the new panel to hook-over your existing x banner frame.